nyx_space::propagators

Struct Propagator

source
pub struct Propagator<D: Dynamics>{
    pub dynamics: D,
    pub opts: IntegratorOptions,
    pub method: IntegratorMethod,
}
Expand description

A Propagator allows propagating a set of dynamics forward or backward in time. It is an EventTracker, without any event tracking. It includes the options, the integrator details of the previous step, and the set of coefficients used for the monomorphic instance.

Fields§

§dynamics: D§opts: IntegratorOptions§method: IntegratorMethod

Implementations§

source§

impl<D: Dynamics> Propagator<D>

The Propagator trait defines the functions of a propagator and of an event tracker.

source

pub fn new( dynamics: D, method: IntegratorMethod, opts: IntegratorOptions, ) -> Self

Each propagator must be initialized with new which stores propagator information.

source

pub fn set_tolerance(&mut self, tol: f64)

Set the tolerance for the propagator

source

pub fn set_max_step(&mut self, step: Duration)

Set the maximum step size for the propagator and sets the initial step to that value if currently greater

source

pub fn set_min_step(&mut self, step: Duration)

source

pub fn rk89(dynamics: D, opts: IntegratorOptions) -> Self

An RK89 propagator (the default) with custom propagator options.

Examples found in repository?
examples/03_geo_analysis/stationkeeping.rs (lines 104-110)
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Set up the dynamics like in the orbit raise.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Define the GEO orbit, and we're just going to maintain it very tightly.
    let earth_j2000 = almanac.frame_from_uid(EARTH_J2000)?;
    let orbit = Orbit::try_keplerian(42164.0, 1e-5, 0., 163.0, 75.0, 0.0, epoch, earth_j2000)?;
    println!("{orbit:x}");

    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(1000.0) // 1000 kg of dry mass
        .fuel_mass_kg(1000.0) // 1000 kg of fuel, totalling 2.0 tons
        .srp(SrpConfig::from_area(3.0 * 6.0)) // Assuming 1 kW/m^2 or 18 kW, giving a margin of 4.35 kW for on-propulsion consumption
        .thruster(Thruster {
            // "NEXT-STEP" row in Table 2
            isp_s: 4435.0,
            thrust_N: 0.472,
        })
        .mode(GuidanceMode::Thrust) // Start thrusting immediately.
        .build();

    // Set up the spacecraft dynamics like in the orbit raise example.

    let prop_time = 30.0 * Unit::Day;

    // Define the guidance law -- we're just using a Ruggiero controller as demonstrated in AAS-2004-5089.
    let objectives = &[
        Objective::within_tolerance(StateParameter::SMA, 42_164.0, 5.0), // 5 km
        Objective::within_tolerance(StateParameter::Eccentricity, 0.001, 5e-5),
        Objective::within_tolerance(StateParameter::Inclination, 0.05, 1e-2),
    ];

    let ruggiero_ctrl = Ruggiero::from_max_eclipse(objectives, sc, 0.2)?;
    println!("{ruggiero_ctrl}");

    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    jgm3_meta.process(true)?;

    let harmonics = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 8, 8, true)?,
    );
    orbital_dyn.accel_models.push(harmonics);

    let srp_dyn = SolarPressure::default(EARTH_J2000, almanac.clone())?;
    let sc_dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn)
        .with_guidance_law(ruggiero_ctrl.clone());

    println!("{sc_dynamics}");

    // Finally, let's use the Monte Carlo framework built into Nyx to propagate spacecraft.

    // Let's start by defining the dispersion.
    // The MultivariateNormal structure allows us to define the dispersions in any of the orbital parameters, but these are applied directly in the Cartesian state space.
    // Note that additional validation on the MVN is in progress -- https://github.com/nyx-space/nyx/issues/339.
    let mc_rv = MultivariateNormal::new(
        sc,
        vec![StateDispersion::zero_mean(StateParameter::SMA, 3.0)],
    )?;

    let my_mc = MonteCarlo::new(
        sc, // Nominal state
        mc_rv,
        "03_geo_sk".to_string(), // Scenario name
        None, // No specific seed specified, so one will be drawn from the computer's entropy.
    );

    // Build the propagator setup.
    let setup = Propagator::rk89(
        sc_dynamics.clone(),
        IntegratorOptions::builder()
            .min_step(10.0_f64.seconds())
            .error_ctrl(ErrorControl::RSSCartesianStep)
            .build(),
    );

    let num_runs = 25;
    let rslts = my_mc.run_until_epoch(setup, almanac.clone(), sc.epoch() + prop_time, num_runs);

    assert_eq!(rslts.runs.len(), num_runs);

    // For all of the resulting trajectories, we'll want to compute the percentage of penumbra and umbra.

    rslts.to_parquet(
        "03_geo_sk.parquet",
        Some(vec![
            &EclipseLocator::cislunar(almanac.clone()).to_penumbra_event()
        ]),
        ExportCfg::default(),
        almanac,
    )?;

    Ok(())
}
More examples
Hide additional examples
examples/03_geo_analysis/raise.rs (lines 118-124)
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();

    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Fetch the EME2000 frame from the Almabac
    let eme2k = almanac.frame_from_uid(EARTH_J2000).unwrap();
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Build the spacecraft itself.
    // Using slide 6 of https://aerospace.org/sites/default/files/2018-11/Davis-Mayberry_HPSEP_11212018.pdf
    // for the "next gen" SEP characteristics.

    // GTO start
    let orbit = Orbit::keplerian(24505.9, 0.725, 7.05, 0.0, 0.0, 0.0, epoch, eme2k);

    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(1000.0) // 1000 kg of dry mass
        .fuel_mass_kg(1000.0) // 1000 kg of fuel, totalling 2.0 tons
        .srp(SrpConfig::from_area(3.0 * 6.0)) // Assuming 1 kW/m^2 or 18 kW, giving a margin of 4.35 kW for on-propulsion consumption
        .thruster(Thruster {
            // "NEXT-STEP" row in Table 2
            isp_s: 4435.0,
            thrust_N: 0.472,
        })
        .mode(GuidanceMode::Thrust) // Start thrusting immediately.
        .build();

    let prop_time = 180.0 * Unit::Day;

    // Define the guidance law -- we're just using a Ruggiero controller as demonstrated in AAS-2004-5089.
    let objectives = &[
        Objective::within_tolerance(StateParameter::SMA, 42_165.0, 20.0),
        Objective::within_tolerance(StateParameter::Eccentricity, 0.001, 5e-5),
        Objective::within_tolerance(StateParameter::Inclination, 0.05, 1e-2),
    ];

    // Ensure that we only thrust if we have more than 20% illumination.
    let ruggiero_ctrl = Ruggiero::from_max_eclipse(objectives, sc, 0.2).unwrap();
    println!("{ruggiero_ctrl}");

    // Define the high fidelity dynamics

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 8, 8, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth.
    let srp_dyn = SolarPressure::default(EARTH_J2000, almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let sc_dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn)
        .with_guidance_law(ruggiero_ctrl.clone());

    println!("{:x}", orbit);

    // We specify a minimum step in the propagator because the Ruggiero control would otherwise drive this step very low.
    let (final_state, traj) = Propagator::rk89(
        sc_dynamics.clone(),
        IntegratorOptions::builder()
            .min_step(10.0_f64.seconds())
            .error_ctrl(ErrorControl::RSSCartesianStep)
            .build(),
    )
    .with(sc, almanac.clone())
    .for_duration_with_traj(prop_time)?;

    let fuel_usage = sc.fuel_mass_kg - final_state.fuel_mass_kg;
    println!("{:x}", final_state.orbit);
    println!("fuel usage: {:.3} kg", fuel_usage);

    // Finally, export the results for analysis, including the penumbra percentage throughout the orbit raise.
    traj.to_parquet(
        "./03_geo_raise.parquet",
        Some(vec![
            &EclipseLocator::cislunar(almanac.clone()).to_penumbra_event()
        ]),
        ExportCfg::default(),
        almanac,
    )?;

    for status_line in ruggiero_ctrl.status(&final_state) {
        println!("{status_line}");
    }

    ruggiero_ctrl
        .achieved(&final_state)
        .expect("objective not achieved");

    Ok(())
}
source

pub fn dp78(dynamics: D, opts: IntegratorOptions) -> Self

A Dormand Prince 7-8 propagator with custom propagator options: it’s about 20% faster than an RK98, and more stable in two body dynamics. WARNINGS: Dormand Prince may have issues with generating proper trajectories, leading to glitches in event finding.

source

pub fn with( &self, state: D::StateType, almanac: Arc<Almanac>, ) -> PropInstance<'_, D>

Examples found in repository?
examples/03_geo_analysis/raise.rs (line 125)
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();

    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Fetch the EME2000 frame from the Almabac
    let eme2k = almanac.frame_from_uid(EARTH_J2000).unwrap();
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Build the spacecraft itself.
    // Using slide 6 of https://aerospace.org/sites/default/files/2018-11/Davis-Mayberry_HPSEP_11212018.pdf
    // for the "next gen" SEP characteristics.

    // GTO start
    let orbit = Orbit::keplerian(24505.9, 0.725, 7.05, 0.0, 0.0, 0.0, epoch, eme2k);

    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(1000.0) // 1000 kg of dry mass
        .fuel_mass_kg(1000.0) // 1000 kg of fuel, totalling 2.0 tons
        .srp(SrpConfig::from_area(3.0 * 6.0)) // Assuming 1 kW/m^2 or 18 kW, giving a margin of 4.35 kW for on-propulsion consumption
        .thruster(Thruster {
            // "NEXT-STEP" row in Table 2
            isp_s: 4435.0,
            thrust_N: 0.472,
        })
        .mode(GuidanceMode::Thrust) // Start thrusting immediately.
        .build();

    let prop_time = 180.0 * Unit::Day;

    // Define the guidance law -- we're just using a Ruggiero controller as demonstrated in AAS-2004-5089.
    let objectives = &[
        Objective::within_tolerance(StateParameter::SMA, 42_165.0, 20.0),
        Objective::within_tolerance(StateParameter::Eccentricity, 0.001, 5e-5),
        Objective::within_tolerance(StateParameter::Inclination, 0.05, 1e-2),
    ];

    // Ensure that we only thrust if we have more than 20% illumination.
    let ruggiero_ctrl = Ruggiero::from_max_eclipse(objectives, sc, 0.2).unwrap();
    println!("{ruggiero_ctrl}");

    // Define the high fidelity dynamics

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 8, 8, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth.
    let srp_dyn = SolarPressure::default(EARTH_J2000, almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let sc_dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn)
        .with_guidance_law(ruggiero_ctrl.clone());

    println!("{:x}", orbit);

    // We specify a minimum step in the propagator because the Ruggiero control would otherwise drive this step very low.
    let (final_state, traj) = Propagator::rk89(
        sc_dynamics.clone(),
        IntegratorOptions::builder()
            .min_step(10.0_f64.seconds())
            .error_ctrl(ErrorControl::RSSCartesianStep)
            .build(),
    )
    .with(sc, almanac.clone())
    .for_duration_with_traj(prop_time)?;

    let fuel_usage = sc.fuel_mass_kg - final_state.fuel_mass_kg;
    println!("{:x}", final_state.orbit);
    println!("fuel usage: {:.3} kg", fuel_usage);

    // Finally, export the results for analysis, including the penumbra percentage throughout the orbit raise.
    traj.to_parquet(
        "./03_geo_raise.parquet",
        Some(vec![
            &EclipseLocator::cislunar(almanac.clone()).to_penumbra_event()
        ]),
        ExportCfg::default(),
        almanac,
    )?;

    for status_line in ruggiero_ctrl.status(&final_state) {
        println!("{status_line}");
    }

    ruggiero_ctrl
        .achieved(&final_state)
        .expect("objective not achieved");

    Ok(())
}
More examples
Hide additional examples
examples/02_jwst_covar_monte_carlo/main.rs (line 118)
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.

    // Download the regularly update of the James Webb Space Telescope reconstucted (or definitive) ephemeris.
    // Refer to https://naif.jpl.nasa.gov/pub/naif/JWST/kernels/spk/aareadme.txt for details.
    let mut latest_jwst_ephem = MetaFile {
        uri: "https://naif.jpl.nasa.gov/pub/naif/JWST/kernels/spk/jwst_rec.bsp".to_string(),
        crc32: None,
    };
    latest_jwst_ephem.process(true)?;

    // Load this ephem in the general Almanac we're using for this analysis.
    let almanac = Arc::new(
        MetaAlmanac::latest()
            .map_err(Box::new)?
            .load_from_metafile(latest_jwst_ephem, true)?,
    );

    // By loading this ephemeris file in the ANISE GUI or ANISE CLI, we can find the NAIF ID of the JWST
    // in the BSP. We need this ID in order to query the ephemeris.
    const JWST_NAIF_ID: i32 = -170;
    // Let's build a frame in the J2000 orientation centered on the JWST.
    const JWST_J2000: Frame = Frame::from_ephem_j2000(JWST_NAIF_ID);

    // Since the ephemeris file is updated regularly, we'll just grab the latest state in the ephem.
    let (earliest_epoch, latest_epoch) = almanac.spk_domain(JWST_NAIF_ID)?;
    println!("JWST defined from {earliest_epoch} to {latest_epoch}");
    // Fetch the state, printing it in the Earth J2000 frame.
    let jwst_orbit = almanac.transform(JWST_J2000, EARTH_J2000, latest_epoch, None)?;
    println!("{jwst_orbit:x}");

    // Build the spacecraft
    // SRP area assumed to be the full sunshield and mass if 6200.0 kg, c.f. https://webb.nasa.gov/content/about/faqs/facts.html
    // SRP Coefficient of reflectivity assumed to be that of Kapton, i.e. 2 - 0.44 = 1.56, table 1 from https://amostech.com/TechnicalPapers/2018/Poster/Bengtson.pdf
    let jwst = Spacecraft::builder()
        .orbit(jwst_orbit)
        .srp(SrpConfig {
            area_m2: 21.197 * 14.162,
            cr: 1.56,
        })
        .dry_mass_kg(6200.0)
        .build();

    // Build up the spacecraft uncertainty builder.
    // We can use the spacecraft uncertainty structure to build this up.
    // We start by specifying the nominal state (as defined above), then the uncertainty in position and velocity
    // in the RIC frame. We could also specify the Cr, Cd, and mass uncertainties, but these aren't accounted for until
    // Nyx can also estimate the deviation of the spacecraft parameters.
    let jwst_uncertainty = SpacecraftUncertainty::builder()
        .nominal(jwst)
        .frame(LocalFrame::RIC)
        .x_km(0.5)
        .y_km(0.3)
        .z_km(1.5)
        .vx_km_s(1e-4)
        .vy_km_s(0.6e-3)
        .vz_km_s(3e-3)
        .build();

    println!("{jwst_uncertainty}");

    // Build the Kalman filter estimate.
    // Note that we could have used the KfEstimate structure directly (as seen throughout the OD integration tests)
    // but this approach requires quite a bit more boilerplate code.
    let jwst_estimate = jwst_uncertainty.to_estimate()?;

    // Set up the spacecraft dynamics.
    // We'll use the point masses of the Earth, Sun, Jupiter (barycenter, because it's in the DE440), and the Moon.
    // We'll also enable solar radiation pressure since the James Webb has a huge and highly reflective sun shield.

    let orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN, JUPITER_BARYCENTER]);
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    // Build the propagator set up to use for the whole analysis.
    let setup = Propagator::default(dynamics);

    // All of the analysis will use this duration.
    let prediction_duration = 6.5 * Unit::Day;

    // === Covariance mapping ===
    // For the covariance mapping / prediction, we'll use the common orbit determination approach.
    // This is done by setting up a spacecraft OD process, and predicting for the analysis duration.

    let ckf = KF::no_snc(jwst_estimate);

    // Build the propagation instance for the OD process.
    let prop = setup.with(jwst.with_stm(), almanac.clone());
    let mut odp = SpacecraftODProcess::ckf(prop, ckf, None, almanac.clone());

    // Define the prediction step, i.e. how often we want to know the covariance.
    let step = 1_i64.minutes();
    // Finally, predict, and export the trajectory with covariance to a parquet file.
    odp.predict_for(step, prediction_duration)?;
    odp.to_parquet("./02_jwst_covar_map.parquet", ExportCfg::default())?;

    // === Monte Carlo framework ===
    // Nyx comes with a complete multi-threaded Monte Carlo frame. It's blazing fast.

    let my_mc = MonteCarlo::new(
        jwst, // Nominal state
        jwst_estimate.to_random_variable()?,
        "02_jwst".to_string(), // Scenario name
        None, // No specific seed specified, so one will be drawn from the computer's entropy.
    );

    let num_runs = 5_000;
    let rslts = my_mc.run_until_epoch(
        setup,
        almanac.clone(),
        jwst.epoch() + prediction_duration,
        num_runs,
    );

    assert_eq!(rslts.runs.len(), num_runs);
    // Finally, export these results, computing the eclipse percentage for all of these results.

    // For all of the resulting trajectories, we'll want to compute the percentage of penumbra and umbra.
    let eclipse_loc = EclipseLocator::cislunar(almanac.clone());
    let umbra_event = eclipse_loc.to_umbra_event();
    let penumbra_event = eclipse_loc.to_penumbra_event();

    rslts.to_parquet(
        "02_jwst_monte_carlo.parquet",
        Some(vec![&umbra_event, &penumbra_event]),
        ExportCfg::default(),
        almanac,
    )?;

    Ok(())
}
examples/03_geo_analysis/drift.rs (line 112)
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Define the orbit.
    // First we need to fetch the Earth J2000 from information from the Almanac.
    // This allows the frame to include the gravitational parameters and the shape of the Earth,
    // defined as a tri-axial ellipoid. Note that this shape can be changed manually or in the Almanac
    // by loading a different set of planetary constants.
    let earth_j2000 = almanac.frame_from_uid(EARTH_J2000)?;

    // Placing this GEO bird just above Colorado.
    // In theory, the eccentricity is zero, but in practice, it's about 1e-5 to 1e-6 at best.
    let orbit = Orbit::try_keplerian(42164.0, 1e-5, 0., 163.0, 75.0, 0.0, epoch, earth_j2000)?;
    // Print in in Keplerian form.
    println!("{orbit:x}");

    let state_bf = almanac.transform_to(orbit, IAU_EARTH_FRAME, None)?;
    let (orig_lat_deg, orig_long_deg, orig_alt_km) = state_bf.latlongalt()?;

    // Nyx is used for high fidelity propagation, not Keplerian propagation as above.
    // Nyx only propagates Spacecraft at the moment, which allows it to account for acceleration
    // models such as solar radiation pressure.

    // Let's build a cubesat sized spacecraft, with an SRP area of 10 cm^2 and a mass of 9.6 kg.
    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(9.60)
        .srp(SrpConfig {
            area_m2: 10e-4,
            cr: 1.1,
        })
        .build();
    println!("{sc:x}");

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics_21x21 = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 21, 21, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics_21x21);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth and Moon.
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Finally, let's propagate this orbit to the same epoch as above.
    // The first returned value is the spacecraft state at the final epoch.
    // The second value is the full trajectory where the step size is variable step used by the propagator.
    let (future_sc, trajectory) = Propagator::default(dynamics)
        .with(sc, almanac.clone())
        .until_epoch_with_traj(epoch + Unit::Century * 0.03)?;

    println!("=== High fidelity propagation ===");
    println!(
        "SMA changed by {:.3} km",
        orbit.sma_km()? - future_sc.orbit.sma_km()?
    );
    println!(
        "ECC changed by {:.6}",
        orbit.ecc()? - future_sc.orbit.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_sc.orbit.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3} deg",
        orbit.raan_deg()? - future_sc.orbit.raan_deg()?
    );
    println!(
        "AOP changed by {:.3} deg",
        orbit.aop_deg()? - future_sc.orbit.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_sc.orbit.ta_deg()?
    );

    // We also have access to the full trajectory throughout the propagation.
    println!("{trajectory}");

    println!("Spacecraft params after 3 years without active control:\n{future_sc:x}");

    // With the trajectory, let's build a few data products.

    // 1. Export the trajectory as a parquet file, which includes the Keplerian orbital elements.

    let analysis_step = Unit::Minute * 5;

    trajectory.to_parquet(
        "./03_geo_hf_prop.parquet",
        Some(vec![
            &EclipseLocator::cislunar(almanac.clone()).to_penumbra_event()
        ]),
        ExportCfg::builder().step(analysis_step).build(),
        almanac.clone(),
    )?;

    // 2. Compute the latitude, longitude, and altitude throughout the trajectory by rotating the spacecraft position into the Earth body fixed frame.

    // We iterate over the trajectory, grabbing a state every two minutes.
    let mut offset_s = vec![];
    let mut epoch_str = vec![];
    let mut longitude_deg = vec![];
    let mut latitude_deg = vec![];
    let mut altitude_km = vec![];

    for state in trajectory.every(analysis_step) {
        // Convert the GEO bird state into the body fixed frame, and keep track of its latitude, longitude, and altitude.
        // These define the GEO stationkeeping box.

        let this_epoch = state.epoch();

        offset_s.push((this_epoch - orbit.epoch).to_seconds());
        epoch_str.push(this_epoch.to_isoformat());

        let state_bf = almanac.transform_to(state.orbit, IAU_EARTH_FRAME, None)?;
        let (lat_deg, long_deg, alt_km) = state_bf.latlongalt()?;
        longitude_deg.push(long_deg);
        latitude_deg.push(lat_deg);
        altitude_km.push(alt_km);
    }

    println!(
        "Longitude changed by {:.3} deg -- Box is 0.1 deg E-W",
        orig_long_deg - longitude_deg.last().unwrap()
    );

    println!(
        "Latitude changed by {:.3} deg -- Box is 0.05 deg N-S",
        orig_lat_deg - latitude_deg.last().unwrap()
    );

    println!(
        "Altitude changed by {:.3} km -- Box is 30 km",
        orig_alt_km - altitude_km.last().unwrap()
    );

    // Build the station keeping data frame.
    let mut sk_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch (UTC)" => epoch_str.clone(),
        "Longitude E-W (deg)" => longitude_deg,
        "Latitude N-S (deg)" => latitude_deg,
        "Altitude (km)" => altitude_km,

    )?;

    // Create a file to write the Parquet to
    let file = File::create("./03_geo_lla.parquet").expect("Could not create file");

    // Create a ParquetWriter and write the DataFrame to the file
    ParquetWriter::new(file).finish(&mut sk_df)?;

    Ok(())
}
examples/04_lro_od/main.rs (line 154)
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();

    // ====================== //
    // === ALMANAC SET UP === //
    // ====================== //

    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's MetaAlmanac.

    let data_folder: PathBuf = [env!("CARGO_MANIFEST_DIR"), "examples", "04_lro_od"]
        .iter()
        .collect();

    let meta = data_folder.join("lro-dynamics.dhall");

    // Load this ephem in the general Almanac we're using for this analysis.
    let mut almanac = MetaAlmanac::new(meta.to_string_lossy().to_string())
        .map_err(Box::new)?
        .process(true)
        .map_err(Box::new)?;

    let mut moon_pc = almanac.planetary_data.get_by_id(MOON)?;
    moon_pc.mu_km3_s2 = 4902.74987;
    almanac.planetary_data.set_by_id(MOON, moon_pc)?;

    let mut earth_pc = almanac.planetary_data.get_by_id(EARTH)?;
    earth_pc.mu_km3_s2 = 398600.436;
    almanac.planetary_data.set_by_id(EARTH, earth_pc)?;

    // Save this new kernel for reuse.
    // In an operational context, this would be part of the "Lock" process, and should not change throughout the mission.
    almanac
        .planetary_data
        .save_as(&data_folder.join("lro-specific.pca"), true)?;

    // Lock the almanac (an Arc is a read only structure).
    let almanac = Arc::new(almanac);

    // Orbit determination requires a Trajectory structure, which can be saved as parquet file.
    // In our case, the trajectory comes from the BSP file, so we need to build a Trajectory from the almanac directly.
    // To query the Almanac, we need to build the LRO frame in the J2000 orientation in our case.
    // Inspecting the LRO BSP in the ANISE GUI shows us that NASA has assigned ID -85 to LRO.
    let lro_frame = Frame::from_ephem_j2000(-85);

    // To build the trajectory we need to provide a spacecraft template.
    let sc_template = Spacecraft::builder()
        .dry_mass_kg(1018.0) // Launch masses
        .fuel_mass_kg(900.0)
        .srp(SrpConfig {
            // SRP configuration is arbitrary, but we will be estimating it anyway.
            area_m2: 3.9 * 2.7,
            cr: 0.96,
        })
        .orbit(Orbit::zero(MOON_J2000)) // Setting a zero orbit here because it's just a template
        .build();
    // Now we can build the trajectory from the BSP file.
    // We'll arbitrarily set the tracking arc to 48 hours with a one minute time step.
    let traj_as_flown = Traj::from_bsp(
        lro_frame,
        MOON_J2000,
        almanac.clone(),
        sc_template,
        5.seconds(),
        Some(Epoch::from_str("2024-01-01 00:00:00 UTC")?),
        Some(Epoch::from_str("2024-01-02 00:00:00 UTC")?),
        Aberration::LT,
        Some("LRO".to_string()),
    )?;

    println!("{traj_as_flown}");

    // ====================== //
    // === MODEL MATCHING === //
    // ====================== //

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Earth and the Sun.
    // The gravity of the Moon will also be accounted for since the spaceraft in a lunar orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![EARTH, SUN, JUPITER_BARYCENTER]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the GRAIL JGGRX model.
    let mut jggrx_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/Luna_jggrx_1500e_sha.tab.gz".to_string(),
        crc32: Some(0x6bcacda8), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jggrx_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Moon principal axes frame.
    let moon_pa_frame = MOON_PA_FRAME.with_orient(31008);
    // let moon_pa_frame = IAU_MOON_FRAME;
    let sph_harmonics = Harmonics::from_stor(
        almanac.frame_from_uid(moon_pa_frame)?,
        HarmonicsMem::from_shadr(&jggrx_meta.uri, 80, 80, true)?,
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(sph_harmonics);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth and Moon.
    // Note that by default, enabling the SolarPressure model will also enable the estimation of the coefficient of reflectivity.
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Now we can build the propagator.
    let setup = Propagator::default_dp78(dynamics.clone());

    // For reference, let's build the trajectory with Nyx's models from that LRO state.
    let (sim_final, traj_as_sim) = setup
        .with(*traj_as_flown.first(), almanac.clone())
        .until_epoch_with_traj(traj_as_flown.last().epoch())?;

    println!("SIM INIT:  {:x}", traj_as_flown.first());
    println!("SIM FINAL: {sim_final:x}");
    // Compute RIC difference between SIM and LRO ephem
    let sim_lro_delta = sim_final
        .orbit
        .ric_difference(&traj_as_flown.last().orbit)?;
    println!("{traj_as_sim}");
    println!(
        "SIM v LRO - RIC Position (m): {:.3}",
        sim_lro_delta.radius_km * 1e3
    );
    println!(
        "SIM v LRO - RIC Velocity (m/s): {:.3}",
        sim_lro_delta.velocity_km_s * 1e3
    );

    traj_as_sim.ric_diff_to_parquet(
        &traj_as_flown,
        "./04_lro_sim_truth_error.parquet",
        ExportCfg::default(),
    )?;

    // ==================== //
    // === OD SIMULATOR === //
    // ==================== //

    // After quite some time trying to exactly match the model, we still end up with an oscillatory difference on the order of 150 meters between the propagated state
    // and the truth LRO state.

    // Therefore, we will actually run an estimation from a dispersed LRO state.
    // The sc_seed is the true LRO state from the BSP.
    let sc_seed = *traj_as_flown.first();

    // Load the Deep Space Network ground stations.
    // Nyx allows you to build these at runtime but it's pretty static so we can just load them from YAML.
    let ground_station_file: PathBuf = [
        env!("CARGO_MANIFEST_DIR"),
        "examples",
        "04_lro_od",
        "dsn-network.yaml",
    ]
    .iter()
    .collect();

    let devices = GroundStation::load_many(ground_station_file)?;

    // Typical OD software requires that you specify your own tracking schedule or you'll have overlapping measurements.
    // Nyx can build a tracking schedule for you based on the first station with access.
    let trkconfg_yaml: PathBuf = [
        env!("CARGO_MANIFEST_DIR"),
        "examples",
        "04_lro_od",
        "tracking-cfg.yaml",
    ]
    .iter()
    .collect();

    let configs: BTreeMap<String, TrkConfig> = TrkConfig::load_named(trkconfg_yaml)?;

    // Build the tracking arc simulation to generate a "standard measurement".
    let mut trk = TrackingArcSim::<Spacecraft, RangeDoppler, _>::new(
        devices,
        traj_as_flown.clone(),
        configs,
    )?;

    trk.build_schedule(almanac.clone())?;
    let arc = trk.generate_measurements(almanac.clone())?;
    // Save the simulated tracking data
    arc.to_parquet_simple("./04_lro_simulated_tracking.parquet")?;

    // We'll note that in our case, we have continuous coverage of LRO when the vehicle is not behind the Moon.
    println!("{arc}");

    // Now that we have simulated measurements, we'll run the orbit determination.

    // ===================== //
    // === OD ESTIMATION === //
    // ===================== //

    let sc = SpacecraftUncertainty::builder()
        .nominal(sc_seed)
        .frame(LocalFrame::RIC)
        .x_km(0.5)
        .y_km(0.5)
        .z_km(0.5)
        .vx_km_s(5e-3)
        .vy_km_s(5e-3)
        .vz_km_s(5e-3)
        .build();

    // Build the filter initial estimate, which we will reuse in the filter.
    let initial_estimate = sc.to_estimate()?;

    println!("== FILTER STATE ==\n{sc_seed:x}\n{initial_estimate}");

    let kf = KF::new(
        // Increase the initial covariance to account for larger deviation.
        initial_estimate,
        // Until https://github.com/nyx-space/nyx/issues/351, we need to specify the SNC in the acceleration of the Moon J2000 frame.
        SNC3::from_diagonal(10 * Unit::Minute, &[1e-11, 1e-11, 1e-11]),
    );

    // We'll set up the OD process to reject measurements whose residuals are mover than 4 sigmas away from what we expect.
    let mut odp = ODProcess::ckf(
        setup.with(initial_estimate.state().with_stm(), almanac.clone()),
        kf,
        Some(ResidRejectCrit::default()),
        almanac.clone(),
    );

    odp.process_arc::<GroundStation>(&arc)?;

    let ric_err = traj_as_flown
        .at(odp.estimates.last().unwrap().epoch())?
        .orbit
        .ric_difference(&odp.estimates.last().unwrap().orbital_state())?;
    println!("== RIC at end ==");
    println!("RIC Position (m): {}", ric_err.radius_km * 1e3);
    println!("RIC Velocity (m/s): {}", ric_err.velocity_km_s * 1e3);

    odp.to_parquet("./04_lro_od_results.parquet", ExportCfg::default())?;

    // In our case, we have the truth trajectory from NASA.
    // So we can compute the RIC state difference between the real LRO ephem and what we've just estimated.
    // Export the OD trajectory first.
    let od_trajectory = odp.to_traj()?;
    // Build the RIC difference.
    od_trajectory.ric_diff_to_parquet(
        &traj_as_flown,
        "./04_lro_od_truth_error.parquet",
        ExportCfg::default(),
    )?;

    Ok(())
}
examples/01_orbit_prop/main.rs (line 142)
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Define the orbit.
    // First we need to fetch the Earth J2000 from information from the Almanac.
    // This allows the frame to include the gravitational parameters and the shape of the Earth,
    // defined as a tri-axial ellipoid. Note that this shape can be changed manually or in the Almanac
    // by loading a different set of planetary constants.
    let earth_j2000 = almanac.frame_from_uid(EARTH_J2000)?;

    let orbit =
        Orbit::try_keplerian_altitude(300.0, 0.015, 68.5, 65.2, 75.0, 0.0, epoch, earth_j2000)?;
    // Print in in Keplerian form.
    println!("{orbit:x}");

    // There are two ways to propagate an orbit. We can make a quick approximation assuming only two-body
    // motion. This is a useful first order approximation but it isn't used in real-world applications.

    // This approach is a feature of ANISE.
    let future_orbit_tb = orbit.at_epoch(epoch + Unit::Day * 3)?;
    println!("{future_orbit_tb:x}");

    // Two body propagation relies solely on Kepler's laws, so only the true anomaly will change.
    println!(
        "SMA changed by {:.3e} km",
        orbit.sma_km()? - future_orbit_tb.sma_km()?
    );
    println!(
        "ECC changed by {:.3e}",
        orbit.ecc()? - future_orbit_tb.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_orbit_tb.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3e} deg",
        orbit.raan_deg()? - future_orbit_tb.raan_deg()?
    );
    println!(
        "AOP changed by {:.3e} deg",
        orbit.aop_deg()? - future_orbit_tb.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_orbit_tb.ta_deg()?
    );

    // Nyx is used for high fidelity propagation, not Keplerian propagation as above.
    // Nyx only propagates Spacecraft at the moment, which allows it to account for acceleration
    // models such as solar radiation pressure.

    // Let's build a cubesat sized spacecraft, with an SRP area of 10 cm^2 and a mass of 9.6 kg.
    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(9.60)
        .srp(SrpConfig {
            area_m2: 10e-4,
            cr: 1.1,
        })
        .build();
    println!("{sc:x}");

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics_21x21 = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 21, 21, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics_21x21);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth.
    let srp_dyn = SolarPressure::default(EARTH_J2000, almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Finally, let's propagate this orbit to the same epoch as above.
    // The first returned value is the spacecraft state at the final epoch.
    // The second value is the full trajectory where the step size is variable step used by the propagator.
    let (future_sc, trajectory) = Propagator::default(dynamics)
        .with(sc, almanac.clone())
        .until_epoch_with_traj(future_orbit_tb.epoch)?;

    println!("=== High fidelity propagation ===");
    println!(
        "SMA changed by {:.3} km",
        orbit.sma_km()? - future_sc.orbit.sma_km()?
    );
    println!(
        "ECC changed by {:.6}",
        orbit.ecc()? - future_sc.orbit.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_sc.orbit.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3} deg",
        orbit.raan_deg()? - future_sc.orbit.raan_deg()?
    );
    println!(
        "AOP changed by {:.3} deg",
        orbit.aop_deg()? - future_sc.orbit.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_sc.orbit.ta_deg()?
    );

    // We also have access to the full trajectory throughout the propagation.
    println!("{trajectory}");

    // With the trajectory, let's build a few data products.

    // 1. Export the trajectory as a CCSDS OEM version 2.0 file and as a parquet file, which includes the Keplerian orbital elements.

    trajectory.to_oem_file(
        "./01_cubesat_hf_prop.oem",
        ExportCfg::builder().step(Unit::Minute * 2).build(),
    )?;

    trajectory.to_parquet_with_cfg(
        "./01_cubesat_hf_prop.parquet",
        ExportCfg::builder().step(Unit::Minute * 2).build(),
        almanac.clone(),
    )?;

    // 2. Compare the difference in the radial-intrack-crosstrack frame between the high fidelity
    // and Keplerian propagation. The RIC frame is commonly used to compute the difference in position
    // and velocity of different spacecraft.
    // 3. Compute the azimuth, elevation, range, and range-rate data of that spacecraft as seen from Boulder, CO, USA.

    let boulder_station = GroundStation::from_point(
        "Boulder, CO, USA".to_string(),
        40.014984,   // latitude in degrees
        -105.270546, // longitude in degrees
        1.6550,      // altitude in kilometers
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
    );

    // We iterate over the trajectory, grabbing a state every two minutes.
    let mut offset_s = vec![];
    let mut epoch_str = vec![];
    let mut ric_x_km = vec![];
    let mut ric_y_km = vec![];
    let mut ric_z_km = vec![];
    let mut ric_vx_km_s = vec![];
    let mut ric_vy_km_s = vec![];
    let mut ric_vz_km_s = vec![];

    let mut azimuth_deg = vec![];
    let mut elevation_deg = vec![];
    let mut range_km = vec![];
    let mut range_rate_km_s = vec![];
    for state in trajectory.every(Unit::Minute * 2) {
        // Try to compute the Keplerian/two body state just in time.
        // This method occasionally fails to converge on an appropriate true anomaly
        // from the mean anomaly. If that happens, we just skip this state.
        // The high fidelity and Keplerian states diverge continuously, and we're curious
        // about the divergence in this quick analysis.
        let this_epoch = state.epoch();
        match orbit.at_epoch(this_epoch) {
            Ok(tb_then) => {
                offset_s.push((this_epoch - orbit.epoch).to_seconds());
                epoch_str.push(format!("{this_epoch}"));
                // Compute the two body state just in time.
                let ric = state.orbit.ric_difference(&tb_then)?;
                ric_x_km.push(ric.radius_km.x);
                ric_y_km.push(ric.radius_km.y);
                ric_z_km.push(ric.radius_km.z);
                ric_vx_km_s.push(ric.velocity_km_s.x);
                ric_vy_km_s.push(ric.velocity_km_s.y);
                ric_vz_km_s.push(ric.velocity_km_s.z);

                // Compute the AER data for each state.
                let aer = almanac.azimuth_elevation_range_sez(
                    state.orbit,
                    boulder_station.to_orbit(this_epoch, &almanac)?,
                    None,
                    None,
                )?;
                azimuth_deg.push(aer.azimuth_deg);
                elevation_deg.push(aer.elevation_deg);
                range_km.push(aer.range_km);
                range_rate_km_s.push(aer.range_rate_km_s);
            }
            Err(e) => warn!("{} {e}", state.epoch()),
        };
    }

    // Build the data frames.
    let ric_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch" => epoch_str.clone(),
        "RIC X (km)" => ric_x_km,
        "RIC Y (km)" => ric_y_km,
        "RIC Z (km)" => ric_z_km,
        "RIC VX (km/s)" => ric_vx_km_s,
        "RIC VY (km/s)" => ric_vy_km_s,
        "RIC VZ (km/s)" => ric_vz_km_s,
    )?;

    println!("RIC difference at start\n{}", ric_df.head(Some(10)));
    println!("RIC difference at end\n{}", ric_df.tail(Some(10)));

    let aer_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch" => epoch_str.clone(),
        "azimuth (deg)" => azimuth_deg,
        "elevation (deg)" => elevation_deg,
        "range (km)" => range_km,
        "range rate (km/s)" => range_rate_km_s,
    )?;

    // Finally, let's see when the spacecraft is visible, assuming 15 degrees minimum elevation.
    let mask = aer_df.column("elevation (deg)")?.gt(15.0)?;
    let cubesat_visible = aer_df.filter(&mask)?;

    println!("{cubesat_visible}");

    Ok(())
}
source

pub fn default(dynamics: D) -> Self

Default propagator is an RK89 with the default PropOpts.

Examples found in repository?
examples/02_jwst_covar_monte_carlo/main.rs (line 106)
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.

    // Download the regularly update of the James Webb Space Telescope reconstucted (or definitive) ephemeris.
    // Refer to https://naif.jpl.nasa.gov/pub/naif/JWST/kernels/spk/aareadme.txt for details.
    let mut latest_jwst_ephem = MetaFile {
        uri: "https://naif.jpl.nasa.gov/pub/naif/JWST/kernels/spk/jwst_rec.bsp".to_string(),
        crc32: None,
    };
    latest_jwst_ephem.process(true)?;

    // Load this ephem in the general Almanac we're using for this analysis.
    let almanac = Arc::new(
        MetaAlmanac::latest()
            .map_err(Box::new)?
            .load_from_metafile(latest_jwst_ephem, true)?,
    );

    // By loading this ephemeris file in the ANISE GUI or ANISE CLI, we can find the NAIF ID of the JWST
    // in the BSP. We need this ID in order to query the ephemeris.
    const JWST_NAIF_ID: i32 = -170;
    // Let's build a frame in the J2000 orientation centered on the JWST.
    const JWST_J2000: Frame = Frame::from_ephem_j2000(JWST_NAIF_ID);

    // Since the ephemeris file is updated regularly, we'll just grab the latest state in the ephem.
    let (earliest_epoch, latest_epoch) = almanac.spk_domain(JWST_NAIF_ID)?;
    println!("JWST defined from {earliest_epoch} to {latest_epoch}");
    // Fetch the state, printing it in the Earth J2000 frame.
    let jwst_orbit = almanac.transform(JWST_J2000, EARTH_J2000, latest_epoch, None)?;
    println!("{jwst_orbit:x}");

    // Build the spacecraft
    // SRP area assumed to be the full sunshield and mass if 6200.0 kg, c.f. https://webb.nasa.gov/content/about/faqs/facts.html
    // SRP Coefficient of reflectivity assumed to be that of Kapton, i.e. 2 - 0.44 = 1.56, table 1 from https://amostech.com/TechnicalPapers/2018/Poster/Bengtson.pdf
    let jwst = Spacecraft::builder()
        .orbit(jwst_orbit)
        .srp(SrpConfig {
            area_m2: 21.197 * 14.162,
            cr: 1.56,
        })
        .dry_mass_kg(6200.0)
        .build();

    // Build up the spacecraft uncertainty builder.
    // We can use the spacecraft uncertainty structure to build this up.
    // We start by specifying the nominal state (as defined above), then the uncertainty in position and velocity
    // in the RIC frame. We could also specify the Cr, Cd, and mass uncertainties, but these aren't accounted for until
    // Nyx can also estimate the deviation of the spacecraft parameters.
    let jwst_uncertainty = SpacecraftUncertainty::builder()
        .nominal(jwst)
        .frame(LocalFrame::RIC)
        .x_km(0.5)
        .y_km(0.3)
        .z_km(1.5)
        .vx_km_s(1e-4)
        .vy_km_s(0.6e-3)
        .vz_km_s(3e-3)
        .build();

    println!("{jwst_uncertainty}");

    // Build the Kalman filter estimate.
    // Note that we could have used the KfEstimate structure directly (as seen throughout the OD integration tests)
    // but this approach requires quite a bit more boilerplate code.
    let jwst_estimate = jwst_uncertainty.to_estimate()?;

    // Set up the spacecraft dynamics.
    // We'll use the point masses of the Earth, Sun, Jupiter (barycenter, because it's in the DE440), and the Moon.
    // We'll also enable solar radiation pressure since the James Webb has a huge and highly reflective sun shield.

    let orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN, JUPITER_BARYCENTER]);
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    // Build the propagator set up to use for the whole analysis.
    let setup = Propagator::default(dynamics);

    // All of the analysis will use this duration.
    let prediction_duration = 6.5 * Unit::Day;

    // === Covariance mapping ===
    // For the covariance mapping / prediction, we'll use the common orbit determination approach.
    // This is done by setting up a spacecraft OD process, and predicting for the analysis duration.

    let ckf = KF::no_snc(jwst_estimate);

    // Build the propagation instance for the OD process.
    let prop = setup.with(jwst.with_stm(), almanac.clone());
    let mut odp = SpacecraftODProcess::ckf(prop, ckf, None, almanac.clone());

    // Define the prediction step, i.e. how often we want to know the covariance.
    let step = 1_i64.minutes();
    // Finally, predict, and export the trajectory with covariance to a parquet file.
    odp.predict_for(step, prediction_duration)?;
    odp.to_parquet("./02_jwst_covar_map.parquet", ExportCfg::default())?;

    // === Monte Carlo framework ===
    // Nyx comes with a complete multi-threaded Monte Carlo frame. It's blazing fast.

    let my_mc = MonteCarlo::new(
        jwst, // Nominal state
        jwst_estimate.to_random_variable()?,
        "02_jwst".to_string(), // Scenario name
        None, // No specific seed specified, so one will be drawn from the computer's entropy.
    );

    let num_runs = 5_000;
    let rslts = my_mc.run_until_epoch(
        setup,
        almanac.clone(),
        jwst.epoch() + prediction_duration,
        num_runs,
    );

    assert_eq!(rslts.runs.len(), num_runs);
    // Finally, export these results, computing the eclipse percentage for all of these results.

    // For all of the resulting trajectories, we'll want to compute the percentage of penumbra and umbra.
    let eclipse_loc = EclipseLocator::cislunar(almanac.clone());
    let umbra_event = eclipse_loc.to_umbra_event();
    let penumbra_event = eclipse_loc.to_penumbra_event();

    rslts.to_parquet(
        "02_jwst_monte_carlo.parquet",
        Some(vec![&umbra_event, &penumbra_event]),
        ExportCfg::default(),
        almanac,
    )?;

    Ok(())
}
More examples
Hide additional examples
examples/03_geo_analysis/drift.rs (line 111)
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Define the orbit.
    // First we need to fetch the Earth J2000 from information from the Almanac.
    // This allows the frame to include the gravitational parameters and the shape of the Earth,
    // defined as a tri-axial ellipoid. Note that this shape can be changed manually or in the Almanac
    // by loading a different set of planetary constants.
    let earth_j2000 = almanac.frame_from_uid(EARTH_J2000)?;

    // Placing this GEO bird just above Colorado.
    // In theory, the eccentricity is zero, but in practice, it's about 1e-5 to 1e-6 at best.
    let orbit = Orbit::try_keplerian(42164.0, 1e-5, 0., 163.0, 75.0, 0.0, epoch, earth_j2000)?;
    // Print in in Keplerian form.
    println!("{orbit:x}");

    let state_bf = almanac.transform_to(orbit, IAU_EARTH_FRAME, None)?;
    let (orig_lat_deg, orig_long_deg, orig_alt_km) = state_bf.latlongalt()?;

    // Nyx is used for high fidelity propagation, not Keplerian propagation as above.
    // Nyx only propagates Spacecraft at the moment, which allows it to account for acceleration
    // models such as solar radiation pressure.

    // Let's build a cubesat sized spacecraft, with an SRP area of 10 cm^2 and a mass of 9.6 kg.
    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(9.60)
        .srp(SrpConfig {
            area_m2: 10e-4,
            cr: 1.1,
        })
        .build();
    println!("{sc:x}");

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics_21x21 = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 21, 21, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics_21x21);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth and Moon.
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Finally, let's propagate this orbit to the same epoch as above.
    // The first returned value is the spacecraft state at the final epoch.
    // The second value is the full trajectory where the step size is variable step used by the propagator.
    let (future_sc, trajectory) = Propagator::default(dynamics)
        .with(sc, almanac.clone())
        .until_epoch_with_traj(epoch + Unit::Century * 0.03)?;

    println!("=== High fidelity propagation ===");
    println!(
        "SMA changed by {:.3} km",
        orbit.sma_km()? - future_sc.orbit.sma_km()?
    );
    println!(
        "ECC changed by {:.6}",
        orbit.ecc()? - future_sc.orbit.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_sc.orbit.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3} deg",
        orbit.raan_deg()? - future_sc.orbit.raan_deg()?
    );
    println!(
        "AOP changed by {:.3} deg",
        orbit.aop_deg()? - future_sc.orbit.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_sc.orbit.ta_deg()?
    );

    // We also have access to the full trajectory throughout the propagation.
    println!("{trajectory}");

    println!("Spacecraft params after 3 years without active control:\n{future_sc:x}");

    // With the trajectory, let's build a few data products.

    // 1. Export the trajectory as a parquet file, which includes the Keplerian orbital elements.

    let analysis_step = Unit::Minute * 5;

    trajectory.to_parquet(
        "./03_geo_hf_prop.parquet",
        Some(vec![
            &EclipseLocator::cislunar(almanac.clone()).to_penumbra_event()
        ]),
        ExportCfg::builder().step(analysis_step).build(),
        almanac.clone(),
    )?;

    // 2. Compute the latitude, longitude, and altitude throughout the trajectory by rotating the spacecraft position into the Earth body fixed frame.

    // We iterate over the trajectory, grabbing a state every two minutes.
    let mut offset_s = vec![];
    let mut epoch_str = vec![];
    let mut longitude_deg = vec![];
    let mut latitude_deg = vec![];
    let mut altitude_km = vec![];

    for state in trajectory.every(analysis_step) {
        // Convert the GEO bird state into the body fixed frame, and keep track of its latitude, longitude, and altitude.
        // These define the GEO stationkeeping box.

        let this_epoch = state.epoch();

        offset_s.push((this_epoch - orbit.epoch).to_seconds());
        epoch_str.push(this_epoch.to_isoformat());

        let state_bf = almanac.transform_to(state.orbit, IAU_EARTH_FRAME, None)?;
        let (lat_deg, long_deg, alt_km) = state_bf.latlongalt()?;
        longitude_deg.push(long_deg);
        latitude_deg.push(lat_deg);
        altitude_km.push(alt_km);
    }

    println!(
        "Longitude changed by {:.3} deg -- Box is 0.1 deg E-W",
        orig_long_deg - longitude_deg.last().unwrap()
    );

    println!(
        "Latitude changed by {:.3} deg -- Box is 0.05 deg N-S",
        orig_lat_deg - latitude_deg.last().unwrap()
    );

    println!(
        "Altitude changed by {:.3} km -- Box is 30 km",
        orig_alt_km - altitude_km.last().unwrap()
    );

    // Build the station keeping data frame.
    let mut sk_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch (UTC)" => epoch_str.clone(),
        "Longitude E-W (deg)" => longitude_deg,
        "Latitude N-S (deg)" => latitude_deg,
        "Altitude (km)" => altitude_km,

    )?;

    // Create a file to write the Parquet to
    let file = File::create("./03_geo_lla.parquet").expect("Could not create file");

    // Create a ParquetWriter and write the DataFrame to the file
    ParquetWriter::new(file).finish(&mut sk_df)?;

    Ok(())
}
examples/01_orbit_prop/main.rs (line 141)
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();
    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's latest MetaAlmanac.
    // This will automatically download the DE440s planetary ephemeris,
    // the daily-updated Earth Orientation Parameters, the high fidelity Moon orientation
    // parameters (for the Moon Mean Earth and Moon Principal Axes frames), and the PCK11
    // planetary constants kernels.
    // For details, refer to https://github.com/nyx-space/anise/blob/master/data/latest.dhall.
    // Note that we place the Almanac into an Arc so we can clone it cheaply and provide read-only
    // references to many functions.
    let almanac = Arc::new(MetaAlmanac::latest().map_err(Box::new)?);
    // Define the orbit epoch
    let epoch = Epoch::from_gregorian_utc_hms(2024, 2, 29, 12, 13, 14);

    // Define the orbit.
    // First we need to fetch the Earth J2000 from information from the Almanac.
    // This allows the frame to include the gravitational parameters and the shape of the Earth,
    // defined as a tri-axial ellipoid. Note that this shape can be changed manually or in the Almanac
    // by loading a different set of planetary constants.
    let earth_j2000 = almanac.frame_from_uid(EARTH_J2000)?;

    let orbit =
        Orbit::try_keplerian_altitude(300.0, 0.015, 68.5, 65.2, 75.0, 0.0, epoch, earth_j2000)?;
    // Print in in Keplerian form.
    println!("{orbit:x}");

    // There are two ways to propagate an orbit. We can make a quick approximation assuming only two-body
    // motion. This is a useful first order approximation but it isn't used in real-world applications.

    // This approach is a feature of ANISE.
    let future_orbit_tb = orbit.at_epoch(epoch + Unit::Day * 3)?;
    println!("{future_orbit_tb:x}");

    // Two body propagation relies solely on Kepler's laws, so only the true anomaly will change.
    println!(
        "SMA changed by {:.3e} km",
        orbit.sma_km()? - future_orbit_tb.sma_km()?
    );
    println!(
        "ECC changed by {:.3e}",
        orbit.ecc()? - future_orbit_tb.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_orbit_tb.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3e} deg",
        orbit.raan_deg()? - future_orbit_tb.raan_deg()?
    );
    println!(
        "AOP changed by {:.3e} deg",
        orbit.aop_deg()? - future_orbit_tb.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_orbit_tb.ta_deg()?
    );

    // Nyx is used for high fidelity propagation, not Keplerian propagation as above.
    // Nyx only propagates Spacecraft at the moment, which allows it to account for acceleration
    // models such as solar radiation pressure.

    // Let's build a cubesat sized spacecraft, with an SRP area of 10 cm^2 and a mass of 9.6 kg.
    let sc = Spacecraft::builder()
        .orbit(orbit)
        .dry_mass_kg(9.60)
        .srp(SrpConfig {
            area_m2: 10e-4,
            cr: 1.1,
        })
        .build();
    println!("{sc:x}");

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Moon and the Sun.
    // The gravity of the Earth will also be accounted for since the spaceraft in an Earth orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![MOON, SUN]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the JGM3 model here, which is the default in GMAT.
    let mut jgm3_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/JGM3.cof.gz".to_string(),
        crc32: Some(0xF446F027), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jgm3_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Earth centered Earth fixed frame, IAU Earth.
    let harmonics_21x21 = Harmonics::from_stor(
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
        HarmonicsMem::from_cof(&jgm3_meta.uri, 21, 21, true).unwrap(),
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(harmonics_21x21);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth.
    let srp_dyn = SolarPressure::default(EARTH_J2000, almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Finally, let's propagate this orbit to the same epoch as above.
    // The first returned value is the spacecraft state at the final epoch.
    // The second value is the full trajectory where the step size is variable step used by the propagator.
    let (future_sc, trajectory) = Propagator::default(dynamics)
        .with(sc, almanac.clone())
        .until_epoch_with_traj(future_orbit_tb.epoch)?;

    println!("=== High fidelity propagation ===");
    println!(
        "SMA changed by {:.3} km",
        orbit.sma_km()? - future_sc.orbit.sma_km()?
    );
    println!(
        "ECC changed by {:.6}",
        orbit.ecc()? - future_sc.orbit.ecc()?
    );
    println!(
        "INC changed by {:.3e} deg",
        orbit.inc_deg()? - future_sc.orbit.inc_deg()?
    );
    println!(
        "RAAN changed by {:.3} deg",
        orbit.raan_deg()? - future_sc.orbit.raan_deg()?
    );
    println!(
        "AOP changed by {:.3} deg",
        orbit.aop_deg()? - future_sc.orbit.aop_deg()?
    );
    println!(
        "TA changed by {:.3} deg",
        orbit.ta_deg()? - future_sc.orbit.ta_deg()?
    );

    // We also have access to the full trajectory throughout the propagation.
    println!("{trajectory}");

    // With the trajectory, let's build a few data products.

    // 1. Export the trajectory as a CCSDS OEM version 2.0 file and as a parquet file, which includes the Keplerian orbital elements.

    trajectory.to_oem_file(
        "./01_cubesat_hf_prop.oem",
        ExportCfg::builder().step(Unit::Minute * 2).build(),
    )?;

    trajectory.to_parquet_with_cfg(
        "./01_cubesat_hf_prop.parquet",
        ExportCfg::builder().step(Unit::Minute * 2).build(),
        almanac.clone(),
    )?;

    // 2. Compare the difference in the radial-intrack-crosstrack frame between the high fidelity
    // and Keplerian propagation. The RIC frame is commonly used to compute the difference in position
    // and velocity of different spacecraft.
    // 3. Compute the azimuth, elevation, range, and range-rate data of that spacecraft as seen from Boulder, CO, USA.

    let boulder_station = GroundStation::from_point(
        "Boulder, CO, USA".to_string(),
        40.014984,   // latitude in degrees
        -105.270546, // longitude in degrees
        1.6550,      // altitude in kilometers
        almanac.frame_from_uid(IAU_EARTH_FRAME)?,
    );

    // We iterate over the trajectory, grabbing a state every two minutes.
    let mut offset_s = vec![];
    let mut epoch_str = vec![];
    let mut ric_x_km = vec![];
    let mut ric_y_km = vec![];
    let mut ric_z_km = vec![];
    let mut ric_vx_km_s = vec![];
    let mut ric_vy_km_s = vec![];
    let mut ric_vz_km_s = vec![];

    let mut azimuth_deg = vec![];
    let mut elevation_deg = vec![];
    let mut range_km = vec![];
    let mut range_rate_km_s = vec![];
    for state in trajectory.every(Unit::Minute * 2) {
        // Try to compute the Keplerian/two body state just in time.
        // This method occasionally fails to converge on an appropriate true anomaly
        // from the mean anomaly. If that happens, we just skip this state.
        // The high fidelity and Keplerian states diverge continuously, and we're curious
        // about the divergence in this quick analysis.
        let this_epoch = state.epoch();
        match orbit.at_epoch(this_epoch) {
            Ok(tb_then) => {
                offset_s.push((this_epoch - orbit.epoch).to_seconds());
                epoch_str.push(format!("{this_epoch}"));
                // Compute the two body state just in time.
                let ric = state.orbit.ric_difference(&tb_then)?;
                ric_x_km.push(ric.radius_km.x);
                ric_y_km.push(ric.radius_km.y);
                ric_z_km.push(ric.radius_km.z);
                ric_vx_km_s.push(ric.velocity_km_s.x);
                ric_vy_km_s.push(ric.velocity_km_s.y);
                ric_vz_km_s.push(ric.velocity_km_s.z);

                // Compute the AER data for each state.
                let aer = almanac.azimuth_elevation_range_sez(
                    state.orbit,
                    boulder_station.to_orbit(this_epoch, &almanac)?,
                    None,
                    None,
                )?;
                azimuth_deg.push(aer.azimuth_deg);
                elevation_deg.push(aer.elevation_deg);
                range_km.push(aer.range_km);
                range_rate_km_s.push(aer.range_rate_km_s);
            }
            Err(e) => warn!("{} {e}", state.epoch()),
        };
    }

    // Build the data frames.
    let ric_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch" => epoch_str.clone(),
        "RIC X (km)" => ric_x_km,
        "RIC Y (km)" => ric_y_km,
        "RIC Z (km)" => ric_z_km,
        "RIC VX (km/s)" => ric_vx_km_s,
        "RIC VY (km/s)" => ric_vy_km_s,
        "RIC VZ (km/s)" => ric_vz_km_s,
    )?;

    println!("RIC difference at start\n{}", ric_df.head(Some(10)));
    println!("RIC difference at end\n{}", ric_df.tail(Some(10)));

    let aer_df = df!(
        "Offset (s)" => offset_s.clone(),
        "Epoch" => epoch_str.clone(),
        "azimuth (deg)" => azimuth_deg,
        "elevation (deg)" => elevation_deg,
        "range (km)" => range_km,
        "range rate (km/s)" => range_rate_km_s,
    )?;

    // Finally, let's see when the spacecraft is visible, assuming 15 degrees minimum elevation.
    let mask = aer_df.column("elevation (deg)")?.gt(15.0)?;
    let cubesat_visible = aer_df.filter(&mask)?;

    println!("{cubesat_visible}");

    Ok(())
}
source

pub fn default_dp78(dynamics: D) -> Self

A default Dormand Prince 78 propagator with the default PropOpts. Faster and more stable than an RK89 (default) but seems to cause issues for event finding. WARNINGS: Dormand Prince may have issues with generating proper trajectories, leading to glitches in event finding.

Examples found in repository?
examples/04_lro_od/main.rs (line 150)
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
fn main() -> Result<(), Box<dyn Error>> {
    pel::init();

    // ====================== //
    // === ALMANAC SET UP === //
    // ====================== //

    // Dynamics models require planetary constants and ephemerides to be defined.
    // Let's start by grabbing those by using ANISE's MetaAlmanac.

    let data_folder: PathBuf = [env!("CARGO_MANIFEST_DIR"), "examples", "04_lro_od"]
        .iter()
        .collect();

    let meta = data_folder.join("lro-dynamics.dhall");

    // Load this ephem in the general Almanac we're using for this analysis.
    let mut almanac = MetaAlmanac::new(meta.to_string_lossy().to_string())
        .map_err(Box::new)?
        .process(true)
        .map_err(Box::new)?;

    let mut moon_pc = almanac.planetary_data.get_by_id(MOON)?;
    moon_pc.mu_km3_s2 = 4902.74987;
    almanac.planetary_data.set_by_id(MOON, moon_pc)?;

    let mut earth_pc = almanac.planetary_data.get_by_id(EARTH)?;
    earth_pc.mu_km3_s2 = 398600.436;
    almanac.planetary_data.set_by_id(EARTH, earth_pc)?;

    // Save this new kernel for reuse.
    // In an operational context, this would be part of the "Lock" process, and should not change throughout the mission.
    almanac
        .planetary_data
        .save_as(&data_folder.join("lro-specific.pca"), true)?;

    // Lock the almanac (an Arc is a read only structure).
    let almanac = Arc::new(almanac);

    // Orbit determination requires a Trajectory structure, which can be saved as parquet file.
    // In our case, the trajectory comes from the BSP file, so we need to build a Trajectory from the almanac directly.
    // To query the Almanac, we need to build the LRO frame in the J2000 orientation in our case.
    // Inspecting the LRO BSP in the ANISE GUI shows us that NASA has assigned ID -85 to LRO.
    let lro_frame = Frame::from_ephem_j2000(-85);

    // To build the trajectory we need to provide a spacecraft template.
    let sc_template = Spacecraft::builder()
        .dry_mass_kg(1018.0) // Launch masses
        .fuel_mass_kg(900.0)
        .srp(SrpConfig {
            // SRP configuration is arbitrary, but we will be estimating it anyway.
            area_m2: 3.9 * 2.7,
            cr: 0.96,
        })
        .orbit(Orbit::zero(MOON_J2000)) // Setting a zero orbit here because it's just a template
        .build();
    // Now we can build the trajectory from the BSP file.
    // We'll arbitrarily set the tracking arc to 48 hours with a one minute time step.
    let traj_as_flown = Traj::from_bsp(
        lro_frame,
        MOON_J2000,
        almanac.clone(),
        sc_template,
        5.seconds(),
        Some(Epoch::from_str("2024-01-01 00:00:00 UTC")?),
        Some(Epoch::from_str("2024-01-02 00:00:00 UTC")?),
        Aberration::LT,
        Some("LRO".to_string()),
    )?;

    println!("{traj_as_flown}");

    // ====================== //
    // === MODEL MATCHING === //
    // ====================== //

    // Set up the spacecraft dynamics.

    // Specify that the orbital dynamics must account for the graviational pull of the Earth and the Sun.
    // The gravity of the Moon will also be accounted for since the spaceraft in a lunar orbit.
    let mut orbital_dyn = OrbitalDynamics::point_masses(vec![EARTH, SUN, JUPITER_BARYCENTER]);

    // We want to include the spherical harmonics, so let's download the gravitational data from the Nyx Cloud.
    // We're using the GRAIL JGGRX model.
    let mut jggrx_meta = MetaFile {
        uri: "http://public-data.nyxspace.com/nyx/models/Luna_jggrx_1500e_sha.tab.gz".to_string(),
        crc32: Some(0x6bcacda8), // Specifying the CRC32 avoids redownloading it if it's cached.
    };
    // And let's download it if we don't have it yet.
    jggrx_meta.process(true)?;

    // Build the spherical harmonics.
    // The harmonics must be computed in the body fixed frame.
    // We're using the long term prediction of the Moon principal axes frame.
    let moon_pa_frame = MOON_PA_FRAME.with_orient(31008);
    // let moon_pa_frame = IAU_MOON_FRAME;
    let sph_harmonics = Harmonics::from_stor(
        almanac.frame_from_uid(moon_pa_frame)?,
        HarmonicsMem::from_shadr(&jggrx_meta.uri, 80, 80, true)?,
    );

    // Include the spherical harmonics into the orbital dynamics.
    orbital_dyn.accel_models.push(sph_harmonics);

    // We define the solar radiation pressure, using the default solar flux and accounting only
    // for the eclipsing caused by the Earth and Moon.
    // Note that by default, enabling the SolarPressure model will also enable the estimation of the coefficient of reflectivity.
    let srp_dyn = SolarPressure::new(vec![EARTH_J2000, MOON_J2000], almanac.clone())?;

    // Finalize setting up the dynamics, specifying the force models (orbital_dyn) separately from the
    // acceleration models (SRP in this case). Use `from_models` to specify multiple accel models.
    let dynamics = SpacecraftDynamics::from_model(orbital_dyn, srp_dyn);

    println!("{dynamics}");

    // Now we can build the propagator.
    let setup = Propagator::default_dp78(dynamics.clone());

    // For reference, let's build the trajectory with Nyx's models from that LRO state.
    let (sim_final, traj_as_sim) = setup
        .with(*traj_as_flown.first(), almanac.clone())
        .until_epoch_with_traj(traj_as_flown.last().epoch())?;

    println!("SIM INIT:  {:x}", traj_as_flown.first());
    println!("SIM FINAL: {sim_final:x}");
    // Compute RIC difference between SIM and LRO ephem
    let sim_lro_delta = sim_final
        .orbit
        .ric_difference(&traj_as_flown.last().orbit)?;
    println!("{traj_as_sim}");
    println!(
        "SIM v LRO - RIC Position (m): {:.3}",
        sim_lro_delta.radius_km * 1e3
    );
    println!(
        "SIM v LRO - RIC Velocity (m/s): {:.3}",
        sim_lro_delta.velocity_km_s * 1e3
    );

    traj_as_sim.ric_diff_to_parquet(
        &traj_as_flown,
        "./04_lro_sim_truth_error.parquet",
        ExportCfg::default(),
    )?;

    // ==================== //
    // === OD SIMULATOR === //
    // ==================== //

    // After quite some time trying to exactly match the model, we still end up with an oscillatory difference on the order of 150 meters between the propagated state
    // and the truth LRO state.

    // Therefore, we will actually run an estimation from a dispersed LRO state.
    // The sc_seed is the true LRO state from the BSP.
    let sc_seed = *traj_as_flown.first();

    // Load the Deep Space Network ground stations.
    // Nyx allows you to build these at runtime but it's pretty static so we can just load them from YAML.
    let ground_station_file: PathBuf = [
        env!("CARGO_MANIFEST_DIR"),
        "examples",
        "04_lro_od",
        "dsn-network.yaml",
    ]
    .iter()
    .collect();

    let devices = GroundStation::load_many(ground_station_file)?;

    // Typical OD software requires that you specify your own tracking schedule or you'll have overlapping measurements.
    // Nyx can build a tracking schedule for you based on the first station with access.
    let trkconfg_yaml: PathBuf = [
        env!("CARGO_MANIFEST_DIR"),
        "examples",
        "04_lro_od",
        "tracking-cfg.yaml",
    ]
    .iter()
    .collect();

    let configs: BTreeMap<String, TrkConfig> = TrkConfig::load_named(trkconfg_yaml)?;

    // Build the tracking arc simulation to generate a "standard measurement".
    let mut trk = TrackingArcSim::<Spacecraft, RangeDoppler, _>::new(
        devices,
        traj_as_flown.clone(),
        configs,
    )?;

    trk.build_schedule(almanac.clone())?;
    let arc = trk.generate_measurements(almanac.clone())?;
    // Save the simulated tracking data
    arc.to_parquet_simple("./04_lro_simulated_tracking.parquet")?;

    // We'll note that in our case, we have continuous coverage of LRO when the vehicle is not behind the Moon.
    println!("{arc}");

    // Now that we have simulated measurements, we'll run the orbit determination.

    // ===================== //
    // === OD ESTIMATION === //
    // ===================== //

    let sc = SpacecraftUncertainty::builder()
        .nominal(sc_seed)
        .frame(LocalFrame::RIC)
        .x_km(0.5)
        .y_km(0.5)
        .z_km(0.5)
        .vx_km_s(5e-3)
        .vy_km_s(5e-3)
        .vz_km_s(5e-3)
        .build();

    // Build the filter initial estimate, which we will reuse in the filter.
    let initial_estimate = sc.to_estimate()?;

    println!("== FILTER STATE ==\n{sc_seed:x}\n{initial_estimate}");

    let kf = KF::new(
        // Increase the initial covariance to account for larger deviation.
        initial_estimate,
        // Until https://github.com/nyx-space/nyx/issues/351, we need to specify the SNC in the acceleration of the Moon J2000 frame.
        SNC3::from_diagonal(10 * Unit::Minute, &[1e-11, 1e-11, 1e-11]),
    );

    // We'll set up the OD process to reject measurements whose residuals are mover than 4 sigmas away from what we expect.
    let mut odp = ODProcess::ckf(
        setup.with(initial_estimate.state().with_stm(), almanac.clone()),
        kf,
        Some(ResidRejectCrit::default()),
        almanac.clone(),
    );

    odp.process_arc::<GroundStation>(&arc)?;

    let ric_err = traj_as_flown
        .at(odp.estimates.last().unwrap().epoch())?
        .orbit
        .ric_difference(&odp.estimates.last().unwrap().orbital_state())?;
    println!("== RIC at end ==");
    println!("RIC Position (m): {}", ric_err.radius_km * 1e3);
    println!("RIC Velocity (m/s): {}", ric_err.velocity_km_s * 1e3);

    odp.to_parquet("./04_lro_od_results.parquet", ExportCfg::default())?;

    // In our case, we have the truth trajectory from NASA.
    // So we can compute the RIC state difference between the real LRO ephem and what we've just estimated.
    // Export the OD trajectory first.
    let od_trajectory = odp.to_traj()?;
    // Build the RIC difference.
    od_trajectory.ric_diff_to_parquet(
        &traj_as_flown,
        "./04_lro_od_truth_error.parquet",
        ExportCfg::default(),
    )?;

    Ok(())
}

Trait Implementations§

source§

impl<D: Clone + Dynamics> Clone for Propagator<D>

source§

fn clone(&self) -> Propagator<D>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<D: Debug + Dynamics> Debug for Propagator<D>

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> Allocation for T
where T: RefUnwindSafe + Send + Sync,